Product Details

이제까지 가장 까다로운 스타넛의 3 세대

무게 : 5.9g.

확장기 : 7075 T6 CNC.

호환 가능 : 표준 1'1 / 8 조절 튜브, 표준 M6 예압 볼트.

지름 : 최소. 최대 22.8mm 25.2mm.

포크 스티어 튜브의 내면을 손상시키지 않고 필요할 때마다 조정할 수있는 안전함을 보장합니다.

표준 내부 직경 범위에서 조정 가능 : 최소 22.8mm, 최대 25.2mm

장착 토크 : 7-8Nm

설치 방법

1. 날카로운 스티어튜브의 상단을 정리하십시오.

2. 손가락으로 울트라스타3 로우콘 부분(하단)을 잡습니다.

3. 울트라스타3를 스티어튜브에 완전히 삽입한 후,

8mm 육각 렌치를 사용하여 탑콘(상단 나사)를 약한 힘으로 돌려 고정하십시오.

4. 울트라스타3를 스티어튜브 상단에서 5 ~ 10mm 아래에 고정하고 7~8Nm의 힘으로 조입니다.

installation

file the top of the steer tube to avoid sharp edges.

Hold lower cone with your fingers.

Use 8mm allen key to screw in top cone until you can fully insert ultrastar3 into the steer tube with mild hand pressure.

ㅑnsert and tighten ultrastar3 in the steer tube at 5 to 10mm from the top.

특징

내부 직경이 22.8 ~ 25.2mm 인 알루미늄,카본 1 1/8' 스티어 튜브에 적합합니다.

 조향 튜브에 적합합니다.

헤드캡 볼트는 표준 M6 볼트에 맞습니다.

O-링 : 2*18mm

용도 : 도로, 싸이클크로스, 크로스컨트리, 트레일.

feature

fits alloy or carbon 1 1/8' steer tubes with 22.8 to 25.2mm internal diameter.

fits atandard M6 top cap bolts.

O-ring : 2*18mm

Destination : road,cyclo-cross,X-country, trail ride.

경고

ultrastar3는 헤드셋 프리로드 튜닝에만 사용해야합니다.

카본 스티어튜브에 ultrastar3이 제대로 잠기지 않은 상태에서 스템을 설치하지 마십시오.

주행하기 전에 항상 스템 클램프를 조이십시오.

(권장 토크를 엄수하세요.)

ultrastar3로 주행 중에 풀린 스템을 고정할 수 없습니다.

Warnings

ultrastar3 should be used for headset preload tuning only.

On carbon fiber steer tubes never install ultrastar3 without a stem properly locked.

Always remember to tighten stem clamp before riding.

(Respect manufacturer recommended torque)

ultrastar3 cannot hold a loose stem while riding.

Payment

We accept the following forms of payment:
- Credit Card
  - Visa
  - MasterCard
  - American Express
  - Discover
- PayPal

Shipping

• Shipping Method : Parcel Service
• Shipping Area : A Region.
• Shipping Cost : International Shipping Fee
• Shipping Time : 1 - 10 days
• Please take into consideration that some products may take additional time for delivery and processing.
  Important: Your order is shipped once your payment has been cleared. Please contact our customer service center if you would like to request an exchange or return on your order.
  
  - Customs and Duties
  
  The recipient will be held responsible for international shipments which may be subject to import duties and taxes. Please be advised that these charges are levied by the destination country and we do not have control over them. In the case that the recipient refuses to receive the parcel, the order will be returned to Korea and will not be re-shipped. Relevant expenses (round-trip shipping, customs, etc.) will be deducted from the refund.
  

Returns & Exchanges

1. Requirements:

Please take into consideration that we only accept qualifying returns but not exchanges. Refunds are issued once the returned products clear our inspection.

1) An item is eligible for cancellation if:
-you posted a Return request within 24 hours of payment and your order is still under “Pending” status (if your order is under “Queued for Shipment” status, please contact our customer service center) or
-the order is delayed for more than 10 days since payment and you have not received any notification regarding the delay; or
-the ordered item is out of stock.

2) We accept return(s) if:

-you receive a product different from your order; or

-you receive a defective product.

**Return Instructions

(1) Post a return request on our Return forum within three days of receipt. You are required to attach the photos of the received product(s) and include the item code, the order number, and the reason for the return.

(2) A customer service representative will be in contact to assist you by email or phone.

(3) Items returned must be in their original condition, which includes tags and any packaging. Also, you need to include a note of your order number, name, and user ID.

*Please be advised that returns are accepted ONLY IF you followed the instructions above and your return request has been approved by our staff. Returns that are shipped to us without any prior consent are not accepted.

*Please note that EVEN the defective/incorrect item(s) must be returned with all of the tags and labels intact. The item(s) must be sent in their original packaging and unworn.

*Please include all contents of the original package and free gifts (if applicable) in your return packaging.

* Shipping fee for any return caused by our fault will be paid by the company. However, if EMS’ cash on delivery is not possible then you can scan the return receipt and either mail it with the item to return or post an image of it on the forum. The shipping fee will be refunded once the returned item has arrived.

3) We do not accept return(s) if:

-you are returning the items just because you changed your mind (on size, color, etc.)
-you are returning shoes, bags, or any other accessories
-the products are damaged due to your mishandling
-your return request is not approved by our staff

The following items are not considered defective:

* Items that are originally manufactured without tags or labels
* Items with creases that may have been made while shipping
* Items with unsatisfactory/incomplete finish due to mass production

4) If there is a missing item from your order:

*Contact our customer service center by phone or by forum (if you cannot reach us by phone) within 1 day of delivery.
*Please keep all contents of the original package including packaging material (boxes, plastic bags etc.) with you until you are instructed otherwise.

Please note that we may not be able to process the refund for your missing item if you lose or damage any packaging material.

Product Inquiry